|
년 도
|
제 목
|
게재지
|
저 자
|
2021
|
Generation of filament winding patterns for elbows with various cross-sections
|
Journal of Composite Materials
|
* Man, * Fu, * Kim, Yoongho Jung
|
2021
|
Filament winding pattern generation for non-axisymmetric mandrels based on uniform quadrilateral elements
|
Journal of Composite Materials Vol. 55, No. 9, pp. 1217-1230
|
* Man, * Kim, * Son, * Kim, Yoongho Jung
|
2021
|
Automatic path generation for tractor-trailers according to the ramp slope of Ro-Ro ships
|
Journal of Computational Design and Engineering Vol. 8, No. 1, pp. 316-329
|
* Man, * Bak, * Son, * Kim, Yoongho Jung
|
2018
|
Effects of hinge design of horizontal-swing fast tool servo (HFTS) for micro-patterning on a roll
|
The International Journal of Advanced Manufacturing Technology Vol. 95, pp. 233-241
|
* Kim, * Lee, * Lee, * Kim, Yoongho Jung
|
2017
|
Development of a backflow simulation program for automotive body assemblies
|
International Journal of Automotive Technology Vol. 18, No. 4, pp. 613-624
|
* Yun, * Lee, * Fu, Yoongho Jung
|
2017
|
Generation of filament-winding paths for complex axisymmetric shapes based on the principal stress field
|
Composite Structures Vol. 161, pp. 330-339
|
* Fu, * Yun, Yoongho Jung, * Lee
|
2016
|
Filament winding path generation based on the inverse process of stability analysis for non-axisymmetric mandrels
|
Journal of Composite Materials Vol. 51, No. 21, pp. 2989-3002
|
* Fu, * Yun, Yoongho Jung
|
2016
|
Real-time graphic visualization of filament band winding for fiber-reinforced cylindrical vessels
|
Journal of Composite Materials Vol. 50, No. 16, pp. 2165-2175
|
* Fu, * Yun, * Kim, Yoongho Jung
|
2016
|
Autocorrelation-based time synchronous averaging for condition monitoring of planetary gearboxes in wind turbines
|
Mechanical Systems and Signal Processing Vol. 70-71, pp. 161-175
|
* Ha, * Youn, * Oh, * Han, Yoongho Jung, * Park
|
2015
|
Development of a gap searching program for automotive body assemblies based on a decomposition model representation
|
Advances in Engineering Software Vol 81, pp. 7-16
|
* Yun, * Lee, Yoongho Jung
|
2013
|
Approximation of planar offset curves using quadratic trigonometric splines with shape parameter
|
International Journal of Precision Engineering and Manufacturing Vol. 14, No.11 pp. 1881-1890
|
* Gu, * Jung, * Lee, * Lee
|
2013
|
A geometric postprocessing method for 5-axis machine tools using locations of joint points
|
International Journal of Precision Engineering and Manufacturing Vol. 14, No.11 pp. 1969-1977
|
* Yun, Yoongho Jung, * Kurfess
|
2013
|
Temperature Dependence of Convective Heat Transfer with Al2O3 Nanofluids in the Turbulent Flow Region
|
Journal of Nanoscience and Nanotechnology, Volume 13, Number 12, pp. 7902-7905(4)
|
* Lee, * Kim,Yoongho Jung
|
2013
|
3D visualization of filament band winding for reinforced plastics manufacture
|
Advanced Materials Research Vol. 816-817, pp. 1006-1009
|
* Fu, * Yun, Yoong Ho Jung
|
2013
|
An experimental study on the performance of a condensing tumbler dryer with an air-to-air heat exchanger
|
Korean Journal of Chemical Engineering 30(6) pp. 1195-1200
|
* Do, * Kim, * Kim, * Jeong, * Park, * Woo, * Kwon, Yoongho Jung, * Lee, * Ahn
|
2009
|
Attaching single carbon nanotube on tip's apex using dielectrophoresis of DC-pulse voltage
|
Transactions of Nonferrous Metals Society of China, Vol. 19, pp. S200-S283
|
* Jung, Y.H.Jung, * Lee
|
2008
|
The Characteristics of Variable Speed Inchworm Stage Using Lever Mechanism by Different Materials
|
Journal Nanoscience and Nanotechnology, Vol. 8, No. 11, pp. 5696-5701
|
* Lee, * Kim, * Choi, * Park, Y.H. Jung
|
2007
|
Five-Axis Machinining Time Estimation Algorithm based on Machine Characteristics
|
Journal of Materials Processing Technology, Vol. 187, pp. 37-40
|
* So, Y.H.Jung, * Park, * Lee
|
2007
|
5-Axis Machining Speed Enhancement by Step Length Optimization
|
Journal of Materials Processing Technology, Vol. 187, pp. 2-5
|
* So, Y.H. Jung, * Hwang, * Kurfess
|
2007
|
Characteristics of mask layer on(100) silicon induced by tribo-nanolithography with diamond tip cantilevers based on AFM
|
Journal of Materials Processing Technology, Vol. 187, pp. 321-325
|
* Park, Y.H.Jung, * Lee, * Morita, * Kawasegi, * So, * Lee
|
2006
|
The influence of electromagnetic force upon the noise of an IPM motor used in a compressor
|
IEEE Transactions On Magnetics, Vol. 32, pp. 3494-3496
|
* Hwang, * Lee, Y.H. Jung
|
2006
|
Influence of magnetic for upon noise of IPM motor used on compressor
|
IEEE International Magnetics Conference PP. 307
|
* Hwang, * Lee, Y.H. Jung
|
2005
|
Speed Enhancement Algorithm for 5-axis Machining based on Step Length Optimization
|
Machine Engineering, Vol. 5, No. 3, pp. 30-36
|
Y.H. Jung
|
2003
|
Swept volume with self-intersection for five-axis ball-end milling
|
Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineeerig Manufacture, Vol. 217, No. 8, pp. 1172-1177
|
Y.H.Jung, * So, * Lee, * Hwang
|
2002
|
A study on the precision machinability of ball end milling by cutting speed optimization
|
Journal of Materials Processing Technology, Vol. 130, No. 131, pp. 357-362
|
* Kim, * Kang, * Kim, Y.H.Jung, * Kim
|
2002
|
A study on micro grooving characteristics of planar lightwave circuit and glass using ultrasonic vibration cutting
|
Journal of Materials Processing Technology, Vol. 130, No. 131, pp. 396-400
|
* Lee, * Lee, Y.H.Jung, * Cung
|
2002
|
Shape design of efficient retroreflective articles
|
Journal of Materials Processing Technology, Vol. 130, No. 131, pp. 632-640
|
* So, Y.H.Jung, * Lee
|
2002
|
NC postprocessor for 5-axis milling machine of table-rotating/tilting type
|
Journal of Materials Processing Technology, Vol. 130, No. 131, pp. 641-646
|
Y.H.Jung, * Lee, * Kim, * Mok
|
2001
|
Comparison of vibration sources between symmetric and asymmetric HDD spindle motors with rotor eccentricity
|
IEEE Transactions on Industry Applications, Vol. 37, No. 6, pp. 1727-1731
|
* Hwang, * Kim, * Jeong, Y.H.Jung, * Kang
|
2001
|
Comparison of magnetic forces for IPM and SPM motors with rotor eccentricity
|
IEEE Transactions on Magnetics, Vol. 37, No. 5, pp. 3448-3451
|
* Kim, * Kim, * Hwang, * Kim, Y.H.Jung
|
2001
|
Various Design Techniques to Reduce Cogging Torque by Controlling Energy Variation in Permanent Magnet Motors
|
IEEE Transactions on Magnetics, Vol. 37, No. 4, pp. 2806-2809
|
* Hwang, * Eom, Y.H.Jung, * Lee, * Kang
|
2001
|
Simulation of surface roughness and profile in high-speed end milling
|
Journal of Materials Processing Technology, Vol. 113, no. 0, pp. 410-415
|
* Lee, * Kang, Y.H.Jung, * Lee * Kim
|
2001
|
Evaluation of thermal characteristics in high-speed ball-end milling
|
Journal of Material Processing Technology, Vol. 113, no. 0, pp. 406-409
|
* Kim, * Lee, * Lee, * Kim, Y.H.Jung
|
2001
|
Chip load prediction in ball-end milling
|
Journal of Material Processing Technology, Vol. 111, No. 1, pp. 250-255
|
Y.H.Jung, * Kim, * Hwang
|
2000
|
Cogging Torque and Acoustic Noise Reduction in Permanent Magnet Motors by Teeth Pairing
|
IEEE Transactions on Magnetics, Vol. 36, No. 5, pp. 3144-3156
|
* Hwang, * Eom, * Hwang, * Jeong, Y.H.Jung
|
년 도
|
제 목
|
게재지
|
저 자 |
2020
|
경사진 램프를 통한 장축 화물의 선적 궤적 생성
|
한국 CDE 학회논문집 제25권 1호, pp. 1-11
|
박*엽, 김*준, 만*동, 윤*득, 정융호
|
2019
|
곡면 병합을 이용한 금형 수정 가공의 단차 최소화
|
한국 CDE 학회논문집 제24권 1호, pp. 84-91
|
정*민, 푸*, 박*성, 정융호
|
2017
|
분해모델과 구멍 메움 알고리즘을 이용한 냉장고 내부 용적의 자동 계산
|
한국 CDE 학회논문집 제22권 1호, pp. 59-69
|
박*성, 푸*, 정융호, 박*근
|
2015
|
승용차 도어의 개폐 이음 저감을 위한 도어체커 개발
|
한국자동차공학회 논문집, 제22권 제 4호, pp.369-401
|
안*주, 손*민, 윤*득, 정융호
|
2015
|
FRP의 원통형 압력 용기제작을 위한 필라멘트 밴드의 감김 시뮬레이션
|
한국CAD/CAM학회논문집, 제19권, 제1호, pp 19-28
|
윤*득, * Fu, 정융호
|
2014
|
비선형 캠과 스프링을 이용한 오븐 렌지 도어의 열림 감성품질 향상 메커니즘 개발
|
한국산학기술학회논문지, 제15권, 제2호, pp 616-624
|
김*연, 윤*득, 정융호
|
2014
|
토션바 트렁크의 팝업량 산포 분석을 위한 해석모델
|
한국자동차공학회논문집, 제22권, 제2호, pp 175-181
|
손*민, 윤*득, 정융호, 임*수, 장*진
|
2012
|
양문형 냉장고 도어의 자동 단차 맞춤 메커니즘 개발
|
한국산학기술학회논문지, 제13권, 제7호, pp 3165-3174
|
웡*, 윤*득, 정융호
|
2012
|
분해 모델을 이용한 자동차 차체의 틈새 탐색 시스템 개발
|
한국자동차 공학회논문집, 제20권, 제4호, pp 109-118
|
배*중, 이*훈, 박*배, 정융호
|
2011
|
자동차 차체에서 빗물의 역류 모사에 관한 연구
|
한국CAD/CAM학회논문집, 제16권, 제5호, pp 323-330
|
이*운, 윤*득, 박*배, 정융호
|
2011
|
4절 링크를 이용한 프렌치 도어의 간섭 방지 설계
|
한국산학기술학회논문지 제12권, 제5호, pp 2031-2037
|
이*규, 윤*득, 정융호
|
2010
|
윤곽 가공을 위한 삼각 스플라인을 이용한 오프셋 곡선의 생성
|
한국CAD/CAM학회논문집, 제15권, 제4호, pp 253-260
|
고*용, 윤*득, 정융호
|
2009
|
기하학적인 방법을 이용한 3 Rotary 형식 5축 가공기의 후처리 방법
|
한국CAD/CAM학회논문집, 제14권, 제5호, pp 291-296
|
윤*득, 정융호, 박*현
|
2009
|
5축 가공의 특이영역에서 공구궤적 오차- Part 1:궤적오차 모델링
|
한국CAD/CAM학회논문집, 제14권, 제1호, pp 18-24
|
소*식, 정융호, 윤*득
|
2008
|
5축 밀링가공기의 직교 특성을 이용한 역기구학 방정식의 유도
|
한국CAD/CAM학회논문집, 제13권, 제2호, pp 153-161
|
소*식, 정융호
|
2007
|
기계특성에 근거한 5축 밀링가공 시간의 예측
|
한국CAD/CAM학회논문집, 제12권, 제1호, pp. 1-7
|
소*식, 정융호, 정*진
|
2007
|
마이크로 엔드밀링에서 가공깊이에 따른 가공변질층의 특성
|
한국공작기계학회 논문집, 제16권, 제4호, pp. 77-83
|
김*석, 김*민, 정융호, 강*창, 이*환, 권*희, 박*효, 이*용
|
2006
|
보간길이 최적화에 의한 5축밀링 가공속도 향상
|
한국CAD/CAM학회논문집, 제11권, 제6호, pp. 422-428
|
정융호
|
2003
|
동시공학에서의 조립을 위한 설계(DFA)지원 시스템 개발
|
한국정밀공학회지, 제20권, 제6호, pp. 151-159
|
목*수, 조*래, 문*섭, 정융호, 황*우
|
2002
|
재활용성을 고려한 분리시간 산정 및 분리 용이성 평가방법론
|
IE Interfaces, 제15권, 제3호, pp. 297-307
|
목*수, 조*래, 정융호, 강*훈
|
2002
|
볼 엔드밀 가공에서 절삭 속도 일정제어법에 의한 커넥팅 로드 가공기술
|
대한기계학회논문집A권, 제26권, 제6호, pp. 1053-1059
|
강*창, 정융호, 김*석, 문*준, 김*균
|
2002
|
단순확장관과 공명기 모듈 설계를 위한 유전자 알고리즘의 적용에 관한 연구
|
한국소음진동공학회지, 제10권, 제1호, pp. 33-40
|
황*문, 황*호, 정*봉, 김*준, 정융호
|
2001
|
고효율 재귀 반사체 형상에 관한 연구
|
한국정밀공학회지, 제19권, 제2호, pp. 160-170
|
황소*식, 정융호, 이*우
|
2000
|
금형의 고정도.고능률 가공기술
|
한국정밀공학회지, 제17권, 제4호, pp. 48-68
|
김*석, 강*창, 김*균, 김*원, 이*용, 이*우, 정융호
|
2000
|
자동차 시트 가상설계와 성능평가를 위한 통합시스템 개발
|
대한기계학회논문집, 제24권, 제7호, pp. 1779-1786
|
임*강, 유*석, 정융호, 김*석, 이*석, 노*철
|
년 도
|
제 목
|
학술회의명
|
저 자
|
2016.2.
|
Visualization of gaps between sheet parts for watertightness of automobiles
|
ICISA 2016
|
* Fu, * An, * Park, Yoongho Jung
|
2015.4.
|
기하학적 후처리방법을 이용한 드릴공구의 NC가공경로생성
|
한국생산제조시스템학회 춘계학술대회
|
김*채, 정융호, 김*연, 윤*득, 안*주, 박*권
|
2015.2.
|
A voxel-based method of internal volume estimation for refrigerator
|
ICMAIE 2015
|
* Fu, * Park, Yoongho Jung
|
2015.2.
|
FRP의 원통형 압력 용기제작을 위한 필라멘트 밴드의 감김 시뮬레이션
|
한국 CAD/CAM 학회
|
윤*득, * Fu, 정융호
|
2014.9.
|
마이크로 드릴공구 가공용 NC궤적 생성 프로그램 개발
|
한국생산제조시스템학회 추계학술대회
|
김*채, 정융호, 김*연 윤*득, 안*주, 박*권
|
2014.4.
|
드릴의 Flank부 형상 파라미터를 이용한 가공 파라미터 계산
|
한국생산제조시스템학회 춘계학술대회
|
김*채, 정융호, 김*연 윤*득, 손*민, 박*권
|
2014.2.
|
Winding Trajectory Generation for Composite Products
|
ICMMA 2014
|
* Fu, * Yun, Yoongho Jung
|
2014.2.
|
주응력의 방향을 이용한 필라멘트 와인딩 복합재의 섬유 궤적 생성
|
한국 CAD/CAM 학회
|
윤*득, 정융호, 푸*
|
2013.4.
|
휠 선단의 형상오차를 고려한 PCD마이크로드릴의 Flute부 NC가공경로생성
|
한국생산제조시스템학회 춘계학술대회
|
김*연, 정융호, 윤*득, 푸*, 손*민, 박*권
|
2012.7.
|
Simulation of Backflow in Automotive Body Assemblies
|
SIMULTECH 2012
|
윤*득, 이*훈, 푸*, 정융호
|
2012.4.
|
풍력발전기 주요기계부품의 고장인가를 위한 공정기법
|
대한기계학회 춘계학술대회
|
윤*득, 이*훈, 푸*, 정융호
|
2011.9.
|
Development of Gap Analysis Program for Assembly of Large Number of Parts
|
IN-TECH 2011
|
이*훈, 정융호
|
2010.4.
|
Computing offsets of freeform curves using quadratic trigonometric splines
|
Proceedings of the 10th WSEAS International Conference on Robotics, Control and Manufacturing Technology (ROCOM '10)
|
고*용, 윤*득, 김*경, 이*운, 김*준, 정융호
|
|
|